PAGE 1 OF 4
- Read t his docum ent before using.- Keep t his docum ent .- Observe all warnings and caut ions.
VNI-WB02
(IDI-WB02)
DP6126
– 01a - DI
Speaker Wall Mount
– 15kg max
Contents:
X1
Weight: 0.5 kg / 1.1 lb
Страница 1: ...PAGE 1 OF 4 Read this document before using Keep this document Observe all warnings and cautions VNI WB02 IDI WB02 DP6126 01a DI Speaker Wall Mount 15kg max Contents X1 X1 Weight 0 5 kg 1 1 lb ...
Страница 2: ...only at proper walls with adequate anchors Inspect bolted assemblies periodically For indoor use only Assembly Separate speaker holder from wall plate Screw the wall plate with the decorative plate to the wall Use two or three screws not supplied Screw speaker plate to NEXO Speaker use screws provided with NEXO Speaker Place the speaker holder with NEXO Speaker into the wall bracket Fix by tighten...
Страница 3: ...utions Use with ID14 Screw speaker plate to ID14 use screws provided with ID14 10mm wrench WB02 on ceiling Tilt 40 à 110 WB02 on wall Tilt 20 à 50 Use with ID24 The angle adjustments depends on the position of the accessory Pos A Tilt 80 to 0 Pos B Tilt 80 to 30 Pos C Tilt 20 to 60 60 to 20 ...
Страница 4: ...ce the ID84 WB02 assembly on the wall plates Tighten to lock the horizontal adjustment position Fixing distance Use with ePS6 8 Remove the 2 screws from the back of ePS place the bracket on the ePS Place the assembly on the wall plate Tighten to lock the horizontal adjustment position NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself Ple...
