NEXPEED NR304G-4W User’s Manual
NexComm Systems, Inc. 21 PAGE
User Mode
The NEXPEED NR304G-4W supports two modes: Login Mode and Configuration Mode. The
dual mode like this provides a security feature for configuration and operation of the router.
Login Mode
This mode does not allow for a router configuration. In this mode, however, only such
commands that are associated with monitoring are executed for the equipment operation.
Activating the Login Mode :
1> Enter the password and press Enter to accept it. The default is “password” :
Password : password
If you enter the correct password, the command-line prompt appears as follows :
NR304G-4W>
2> To close this mode, enter the Exit command at the prompt.
NR304G-4W> exit
Note
:
The default password must be typed in a lower case. If the properly typed default
password does not work, check whether the Caps Lock key is pressed or not.
Configuration Mode
This mode makes all command available to configuring system and monitoring
administrative information.
Activate the Configuration Mode.
1>
Type the following command in Login Mode :
NR304G-4W> enable
Enter the password and press Enter to accept it. The default is “password” :
Password : password
If you enter the correct password, the command-line prompt appears as follows :
NR304G-4W(conf)#
2>
To close this mode, enter the Exit command at the prompt.
NR304G-4W(conf)# exit
Note
:
The default password must be typed in a lower case. If the properly typed default
password does not work, check whether the Caps Lock key is pressed or not.
