Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
3
Chapter 1: Product Introduction
VTC 1010 User Manual
Hardware Specifications
CPU
▪
Intel
®
Atom™ processor E3827, dual core 1.75GHz
Memory
▪
1x 204-pin DDR3L SO-DIMM socket support 1066MHz / 1333MHz up to 8GB.
Default 2GB
Storage
▪
1x 2.5” SATA 2.0
▪
1x SD card socket
Expansion
▪
1x full size Mini-PCIe socket (USB 2.0)
▪
1x full size Mini-PCIe socket (USB 2.0 + PCIe)
▪
1x full size Mini-PCIe socket (mSATA or PCIe)
▪
1x half size Mini-PCIe socket (USB 2.0 + PCIe)
Function
▪
1x default U-blox M8N GPS module (72-channel, GPS, GLONASS, BeiDou,
SBAS) or optional modules with Dead Reckoning support
▪
Built-in G-sensor, Gyroscope, and e-Compass sensors
I/O Interface-Front
▪
8x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO
▪
2x external accessible SIM card socket (selectable) with cover
▪
1x audio jack 3.5mm for WWAN voice communication, including 1x Mic-in and
1x Line-out
▪
1x external accessible SD card socket with cover
▪
1x event button (trigger type)
▪
1x reset button
▪
1x type A USB 3.0 compliant host, supporting system boot up.
I/O Interface-Rear
▪
1x 9~36VDC input with ignition and 11W typical power consumption
▪
1x type A USB 2.0 compliant host, supporting system boot up
▪
1x RJ45 10/100/1000 Fast Ethernet with LED
▪
1x phone jack 3.5mm for Mic-in (for WWAN voice communication)
▪
1x phone jack 3.5mm for Line-out (for PC audio)
▪
1x DB-15 VGA. Resolution up to 2500 x 1600 @60Hz
▪
1x DP port. Resolution up to 2500 x 1600 @60Hz
▪
1x DB-9 for RS-232
▪
4x antenna hole for GPS/ WWAN/ WLAN/ BT
▪
1x LHF 60-pin connector
1x 6-pin power connector, 12VDC output (max: 1A)
1x type A female USB 2.0 compliant host, supporting system boot up.
1x DB-9 RS-232
1x DB-9 RS-422/ 485
1x DB-9 female 3x DI and 3x DO. Onboard CAN 2.0B signals
(Programmable Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 3~12VDC
(Programmable Digital Output)
Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital Output (Source Type): 3~24VDC, max current: 150mA
1x DB-9 for optional ODBII module (ASE J1939 or J1708)
1x DB-9 for optional GPS Dead Reckoning module
4x BNC connector video-in for optional 4-channel video capture card
4x audio connector for 7.1 channel audio output
(front, center/ woofer, rear surround, side surround)
Power Management
▪
Selectable boot-up & shut-down voltage for low power protection by
software
