background image

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

25

NEX 613 User Manual 

Chapter 3: BIOS Setup

ACPI Settings

This section is used to configure ACPI settings.

Advanced

Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Select disable for ACPI 
suspend type S1. It is 

recommended to select auto for 
ACPI S3 power saving.

Suspend to RAM

Check Ready Bit

ACPI HPET Table

PS/2 Keyboard Power On

PCI Devices Power On

Wake From Onboard LAN 2

RTC Alarm Power On

USB Keyboard/Remote Power On

USB Mouse Power On

[Auto]

[Enabled]

[Enabled]

[Disabled]

[Disabled]

[Disabled]

[By OS]

[Disabled]

[Disabled]

Suspend to RAM

Select disable for ACPI suspend type S1. It is recommended to select auto 
for ACPI S3 power saving.

Check Ready Bit

Enables or disables Check Ready Bit.

ACPI HPET Table

Enables or disables ACPI HPET Table.

COM1 to COM6 Configuration

Configures the parameters of COM1 to COM6.

WDT Timeout Reset

Enables or disables the Watchdog Timer timeout to reset the system.

Advanced

Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Set Parameters of COM1

Super IO Configuration

COM1 Configuration

COM2 Configuration

COM3 Configuration

COM4 Configuration

COM5 Configuration

COM6 Configuration

WDT Timeout Reset

[Disabled]

Super IO Configuration

This section is used to configure the serial ports.

Содержание NEX 613














































Отзывы: