Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
17
NDiS B327 User Manual
Chapter 3: System Setup
1. There are two SO-DIMM sockets in NDiS B327. One is on the top side and
the another is on the bottom.
With the chassis cover removed, install a memory module in the SO-
DIMM socket. Insert the module into the socket at an approximately 30
degree angle. Push the module down until the clips on both sides of the
socket lock into position. The gold-plated connector on the edge of the
module will almost completely disappear inside the socket.
Installing SO-DIMM Memory Modules
SO-DIMM
2. Push the module down until the clips on both sides of the socket lock
into position. You will hear a distinctive “click” sound, indicating the
module is correctly locked into position.
