Nexcom NDiS 162 Скачать руководство пользователя | Manualshive

Страница: 4 / 56

background image

Copyright © 2008 NEXCOM International Co., Ltd. All Rights Reserved.

iv

NDiS 162 User Manual

Preface

P

refaCe

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices
and describes how to keep the system CE compliant.

Declaration of Conformity

FCC

This equipment has been tested and verified to comply with the limits for
a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area (domestic environment) is likely to cause harmful interfer-
ence, in which case the user will be required to correct the interference
(take adequate measures) at their own expense.

CE

The product(s) described in this manual complies with all applicable Euro-
pean Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

Copyright

This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written consent from
NEXCOM International Co., Ltd.

Disclaimer

The information in this document is subject to change without prior notice
and does not represent commitment from NEXCOM International Co., Ltd.
However, users may update their knowledge of any product in use by con-
stantly checking its manual posted on our website: http://www.nexcom.
com. NEXCOM shall not be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use of any product, nor for any
infringements upon the rights of third parties, which may result from such
use. Any implied warranties of merchantability or fitness for any particular
purpose is also disclaimed.

Acknowledgements

NDiS 162 is a trademark of NEXCOM International Co., Ltd. All other prod-
uct names mentioned herein are registered trademarks of their respective
owners.

«
...
2
3
4
5
6
...
»

Содержание NDiS 162

























































Отзывы:

Нет отзывов

Похожие инструкции для NDiS 162

Бренд: Uniden Страницы: 134

Бренд: emmeti Страницы: 7

Бренд: TCS Страницы: 8

IRC-320GE Series

Бренд: vds Страницы: 41

Бренд: Genie Страницы: 10

Бренд: Laon People Страницы: 46

Бренд: OM SYSTEM Страницы: 467

Бренд: Concord Camera Страницы: 61

Бренд: Olympus Страницы: 9

Бренд: JAI Страницы: 64

Бренд: Sena Страницы: 20

Бренд: Advantech Страницы: 40

Бренд: Ricoh Страницы: 2

Бренд: Samsung Страницы: 4

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 10

Бренд: Samsung Страницы: 4

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды