NewTek Tricaster TCXD850, Руководство пользователя, Страница: 46 / 336

Page | 30
*Note: Analog connections for SpeedEDIT™ and LiveText™ output are pre-defined, and cannot be
user-modified. Please see Chapter 17 for details.
Figure 22
1. Move your mouse pointer over the large Program Output monitor on the Live Desktop .
2. Click the Configure button (gear) that appears above its top-right corner (Figure 22) to
open the Output Configuration panel.
The first tab in this panel is labeled
Output . Optional settings for SD Analog Connections are
located in the lower part of this pane (Figure 23).
The SD Analog Connections settings group in
the lower part of the Output tab provides
options for the first two video outputs –
designated as
Hardware Row 1 and 2 .
The video formats for
Row 1 and Row 2 output
always conform to the session, but their
connection types are independent of one
another. For an
SD session , you can choose
between a Component connection type and
Composite + Y/C . (Since the only analog
connection possibility for HD sessions is
Component , these options are locked.)
Selecting the
Composite + Y/C option sends
composite video output to the second BNC
connector in an output row
(labeled Y ), and Y/C
to the third and fourth connectors (labeled Pb
and Pr , respectively).
Figure 23