NewTek Tricaster TCXD850, Руководство пользователя, Страница: 301 / 336

Page | 285
SUPPLEMENTARY QUESTION:
Q: Why does latency seem higher for certain video formats (i.e. 24p, 25p, or 30p )?
A: TriCaster passes frames through the switcher at the appropriate frame rate. When the session
format calls for frames at 60Hz, displayed frames are refreshed much more often than (for
example) a 24p format. Consequently,
apparent latency will also be less than half what it would
be at 24Hz. In general, the lower the frame-rate of the session video format, the higher latency
will seem to be.
A.8.2 WHY IS MY POWER SUPPLY BEEPING?
TriCaster has redundant, replaceable power supply units. When you i) disconnect or ii) power
down just one of the modules, or iii), if a PSU should fail, a beep is sounded to alert you. If you
wish, you can mute the alert by pressing the green button on the back of the unit.
Figure 215
SUPPLEMENTARY QUESTION:
Q: Where can I obtain replacement or spare Power Supply modules?
A: Contact NewTek Sales for purchase information for spare TriCaster components.