NewTek Tricaster TCXD850, Руководство пользователя, Страница: 35 / 336

Page | 19
Figure 11
1. Connect video sources to the appropriate connectors in the VIDEO IN section (Figure
11), whether SDI , Component , Y/C (S-Video) or Composite (may require RCA to BNC
adapter).
a. SDI
–
Attach the SDI source connectors to BNC connectors marked SDI in the
Video In group.
Hint: If your equipment supports SDI, this is your best quality I/O option.
b. Component – Attach the appropriate BNC connectors from your sources to all
three analog BNC connectors (labeled Y , Pb and Pr ) in each column in the
Video In group.
c. Y/C
–
If your S-Video equipment and cabling has the usual 4-pin mini-DIN
connectors, you will need an S-Video to dual BNC adapter. To connect Y/C
sources, attach the Y (luma) connector of your source to the second analog
BNC connector (labeled Pb ). Attach the source’s C (chroma) connector to the
bottom connector (labeled Pr ).
d. Composite - Attach the composite source’s connector (may require an RCA to
BNC adapter) to the second connector (labeled Y ).
Note: The video broadcast standard (such as NTSC, NTSC-J or PAL) of all video sources connected
for a given session must be the same.