NewTek Tricaster TCXD850, Руководство пользователя, Страница: 236 / 336

Page | 220
All the settings you need to configure your streaming output are located in the Stream
Configuration panel (Figure 202). To open it, click the Configure button (gear) beside the Stream
button – beneath the Program Output monitor.
15.1.1 PULL PROFILES
If you are streaming internally (to people in your building or inside your own corporate firewall),
Pull streaming may well provide the easiest approach. (Be aware that since your stream may be
constrained by lower bandwidth than a commercial streaming service typically offers, Pull
streaming may falter when more than a few users are viewing the stream. Also, Flash does not
support Pull type connections.)
To see what Internet address to provide your customers or streaming provider, select a suitable
Pull profile from the
Stream Type menu. After pressing the Stream button (beneath Program
Output ) the stream will commence, and the button will light up to indicate this.
Note: The Windows Media Encoder supports Windows Media 11 and VC1 presets. VC1 is the
video standard for HD DVD and Blu-Ray™ players, and is also used in some other environments
such as gaming applications.
Figure 203
Once you begin (Pull) streaming, the Stream Configuration panel displays the IP (Internet
Protocol) address of your computer on the network. This information will be provided as
‘punctuated’ numeric value in the
Location display field.
Your live program stream will be sent continuously to the network while the Stream button is
enabled.