NewTek Tricaster TCXD850, Руководство пользователя, Страница: 163 / 336

Page | 147
DSK POSITIONING
Each DSK layer has its own Pos (Position) button and settings. Click the neighboring Pos button
to open the Overlay Position panel for a given layer.
Position panel settings are organized into two groups named Crop Edges and Position . The
current settings can be toggled on/off using the Enable switch at upper left or Reset (for either
group) with a single click.
The Crop Edges controls are
nearly identical to Crop
settings in TriCaster’s Input
Configuration panel.
However, these local DSK
settings are independent, and
apply even when the
Crop in
Input Configuration is not
enabled.
The rest of the panel is
devoted to
Position settings.
At the top we see three
buttons –
Position , Rotation , and Scale ,
respectively.
Click and drag on the Position button (a
double-headed arrow) to relocate the
associated
DSK layer vertically or
horizontally within the frame.
Notice that by dragging left or right on either
of the two numeric controls below, you can
adjust the position on a single axis.
You can also constrain mouse actions to one axis by holding down the Ctrl key before dragging.
Figure 136