NewTek tricaster advanced edition, Руководство пользователя, Страница: 41 / 339

Page | 25

Simultaneously send output to both analog and digital devices (except TriCaster 410, which provides
digital output connections only).
 Send program output, secondary mixes, or custom ‘monitor bridge’ layouts to a supplemental monitor
or projector using Multiview.

Supply independent video outputs to the two Display ports for supplemental monitoring or projection.

Stream program output to the Internet via a suitable network connection.
3.7.2
HD AND SD
As mentioned earlier, for HD sessions TriCaster supports simultaneous output of both SD (Standard
Definition) and HD (High Definition) video. Except for TriCaster 410. TriCaster Mini SDI and Mini, the Video
Output connector groups on TriCaster’s backplate are arranged in vertical columns of four BNC connectors,
offering the following connection possibilities for live production:

Output 1 video output format is determined by the session (see Section 5.1). When the session is SD
4:3 or 16:9, output is likewise SD 4:3 or 16:9. When the session is HD, output is HD.
 TriCaster Advanced Edition supports independent configuration of Output 2 (and Output 3 for 4RU
models). The desired format can be selected in the Live Desktop (Output Configuration panel).
1. Connect downstream video devices to the appropriate output connectors in the VIDEO OUT section,
whether SDI, HDMI, Component, Y/C (BNC) or Composite (TriCaster 410 supports SDI output only,
TriCaster Mini supports HDMI only).
Please note that Y/C and Composite may require RCA (cinch plug) or S-video (4 pin mini-DIN) to BNC
adapters, and also that both of these connection options support output at SD resolution only.
a. SDI or HDMI – Attach SDI connectors to BNC or HDMI (TriCaster Mini only) connectors in the
VIDEO OUT group labeled 1-(2 or 3).
Hint: If your equipment supports SDI, this is the best alternative. Note that the following analog output
options are not supported by TriCaster 410 or TriCaster Mini
b. Component – Attach your device to the second, third and fourth BNC connectors (Y, Pb and Pr).
c. Y/C – If your S-Video equipment and cabling has the usual 4-pin mini-DIN connectors, you will
need an ‘S-Video to dual BNC’ adapter.
i. Attach the Y (luma) connector of your device to the second analog BNC connector row
(labeled Pb at far left in the VIDEO IN group).
ii. Attach the C (chroma) connector to the third analog connector (labeled Pr).
d.
Composite – Attach the device’s connector to the first (top) analog connector (just above the pair
labeled Y/C).
2. Connect TriCaster’s audio outputs:
a. Analog audio – Connect external audio devices to the connectors in the AUDIO OUT section.