NewTek NDIHX-PTZ2, Руководство по эксплуатации

Страница: 17 / 44

Page | 13
Section 3 REMOTE CONTROL & OSD
Some of the more exotic settings and options available on your NDIHX-PTZ2 are supported
by means of the onscreen display, and accessed via the included remote control. This section
first describes the features of the latter, then provides a full list of options and settings in the
‘OSD’.
3.1
REMOTE CONTROL
The following table identifies the various controls and buttons on your NDIHX-PTZ2 remote control.
Item Description

,

,

,

Pan or tilt the camera
Back Light Enable/Disable backlight compensation
Camera select Control 1 ~ 3 of VC-A50P
Auto Auto focus
Focus: Manual,
Far, Near
Turn on manual focus to adjust the focal length
using the Far and Near buttons
Freeze Freeze the screen
Home-Enter Go back to the main page / Execute
Info Status information
L/R
Direction Set
L/R Direction / Normal
Menu Display OSD menu
Mirror Rotate the image (OFF / Mirror / Flip / Rotate)
Pan/Tilt
Reset
Clear the Pan / Tilt setting
Picture Image effect: OFF / NEG / Black & White
Power Power Switch
Preset Select a Preset (0 ~ 9) to store the current
position data
Reset Select a Preset (0 ~ 9) to clear
Zoom-Fast Adjust image size
Zoom-Slow Fine-tune image size