NewTek 3Play 3P1, Руководство пользователя

Страница: 76 / 206

Page | 62
OPTIONS

One Button Marking – Section 8.10.1 discusses methods you will use to mark (define the in and
out points for) CLIP LIST events. The “one button marking” method requires only that you press
the OUT button; an In point is set automatically at a pre-defined earlier time. This menu items
lets you choose the offset used for the automatic In point.

Still Image Duration – Choose the default duration applied to still images added to the CLIP or
PLAY LIST.

Out Point Padding – This menu item optionally allows play to continue past the actual Out point
for CLIP LIST events from a minimum period of five seconds to ‘infinite’ (i.e., until the recorded
file ends or you press STOP).

CLIP LIST Previews – This option (not available in 3Play Mini) toggles the display of Clip Monitors
in the area below the CLIPS LIST tabs. Small previews show all recorded angles for the currently
active CLIP LIST event row.

Failsafe Camera Configuration – If you have enabled A/V Passthrough (see Section 7.1.2) you can
use this menu item to access setup controls for (video) Input 8 when the session is in Redundant
(4 Channel Mode).

Tally from TriCaster – When a downstream TriCaster is receiving 3Play’s network output via one
of its own Network Inputs, enable this option to shown red and green on-air tally borders around
3Play viewports (requires TriCaster Advanced Edition).

Single Pane View – This powerful option can have a dramatic impact on your replay workflow:
o
Enable Single Pane View to collapse the CLIPS LIST and PLAY LIST panes into one ‘super’
module showing CLIPS LIST tabs at left, and PLAY LIST tabs at right.
o
Drag items from a PLAY LIST onto PLAY LIST or CLIP LIST tabs to copy them to the target.
MACROS
3Play’s extensive Macros system provides a wealth of powerful capabilities. Macros and related tools are
discussed in detail in Chapter 17.
WORKSPACES
3Play supports multiple multiview monitor
displays (the number varies by model).
Multiview 1 is the Replay Desktop.
Optional layouts for additional Multiview
screens are added to the Workspaces menu as
supplemental display devices are detected.
Figure 62