NewTek 3Play 3P1, Руководство пользователя

Страница: 120 / 206

Page | 106

Or navigate to the field using arrow keys, etc. (snapping the current timecode value into the
FastClip dataview beneath the Output A monitor), then edit the existing value using the keyboard
and press ENTER.
Another approach to trimming is to Jog (using the Control Surface) to a different timecode position, and
then hold down SHIFT while pressing IN or OUT to update the current In Point or Out Point respectively.
(See also Section 11.4, Playing Clip.)
Of course, changing the value of the In Point or Out Point will have an effect on Duration, and vice versa.
(Editing Duration normally affects the Out Point, providing the desired length can be achieved by doing
that alone; in rare cases when the Out Point reaches the end of the recorded footage, the In Point is
adjusted as required).
Tip: The Jog control is normally restricted to the established length of the clip, as established by its In
Point and Out Point. To move into frames beyond this range, hold down SHIFT.
Naturally, all clips for the current event are affected by trimming operation as above. In the case of multi-
selected events, only the displayed clip and associated clips for the same event are trimmed.
Tip: Individual clips that have been added to a PLAY LIST can be trimmed independently, without altering
the timing of the original event in the CLIP LIST, or other PLAY LIST clips originally added from the same
event.
11.3.3 MEMO FIELDS
Memo fields allow you to insert text notes or tags to accompany any clip for an event (for more
information about tagging, please see Chapter 13). These can identify a player and team, the type of
action marked, or any other sort of information that is useful to you.
To create a new Memo entry (or overwrite an existing entry completely), simply navigate to the desired
Memo field, add text to the dataview (by typing or using tags), and finally press ENTER to confirm the
entry and update the Memo. (To cancel without accepting changes, press the ESC key.)
There are several ways to add to or modify already existing text in a Memo field. Click the Memo cell with
the mouse, or navigate to it using the keyboard or Control Surface; the existing text entry is snapped into
the dataview. Then press ENTER (or F2 on the keyboard). The characters of the current entry are selected
in the dataview, with the cursor placed to the right of the text, ready for you to make additions or edits.
11.3.4 MANAGING EVENTS
Events can be trimmed and named as described in prior sections (see Section 8.10). We’ve spoken, too,
about managing clip order and tab placement by editing the Event ID (11.3.1). Events can also be re-
ordered by clicking anywhere in their row and dragging up or down.