Modem
Reference Manual for EL470 IP Satellite Modem
Command
IfChConfigEthTxISI
IN ISI
IN ISI
Used as
variable of
Command(s)
Page
Description
Configuration of the DVB-S2 input stream identifier. The DVB-S2 input
stream identifier or ISI is present in the second byte position of the
MATYPE field in the baseband header of a DVB-S2 baseband frame. It is
a single byte identifying the encapsulated stream in case of multiple input
streams. When the modulator input format consists of baseband frames,
this value is used for filtering the matching stream for dedicated
processing like network clock reference insertion or monitoring.
In all other cases (e.g. a MPEG transport stream or generic stream
inputs), this input stream identifier value is filled-in in the MATYPE field of
the generated baseband frames.
RMCP
Command
ITi
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01InterfaceEntry
Command
ntcDevsMod01IfChConfigEthTxISI
OID
1.3.6.1.4.1.5835.3.1.4.1.70.1.1
Values
Factory Default
00
String Description
length : 0 .. 2
format : Hexadecimal chars
Command
IfChConfigEthTxPID
IN PID
IN PID
Used as
variable of
Command(s)
Page
Description
Configuration of the PID of the incoming MPEG transport stream from
which the Ethernet packets in a channel configuration are extracted.
RMCP
Command
ITP
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01InterfaceEntry
Command
ntcDevsMod01IfChConfigEthTxPID
OID
1.3.6.1.4.1.5835.3.1.4.1.72.1.1
Values
GUI Unit
NA
Cmd Unit
Factory Default (CU)
NA
0
Expert Range (CU)
0 .. 8192
Command
IfChConfigEthTxAirMac
IN Air-MAC address
IN Air-MAC address
Used as
variable of
Command(s)
Page
Description
Configuration of the Air-MAC address if the decapsulator has enabled the
Air-MAC destination addressing.
RMCP
Command
ITA
Access
Normal user : RW
Expert user : RW
version 3.1
180
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
