Newport ONE-XY Series, Руководство пользователя, Страница: 20 / 26

EDH0351En1012 — 10/18
10
ONE-XY Series Integrated XY Linear Motor Stages
6.0 — Connection to Newport Controllers
NOTE
Visit www.newport.com for compatible Newport controllers.
6.1 Warnings on Controllers
Controllers are intended for use by qualified personnel who recognize
shock hazards and are familiar with safety precautions required to avoid
possible injury. Read the controller user’s manual carefully before
operating the instrument and pay attention to all written warnings and
cautions.
Specifications listed in this guide are based on operation with Newport
Control and Drive Electronics. The XPS Controller is delivered with a
configuration file that has been developed at the factory for operation in a
no-load condition for immediate plug-and-play operation.
Newport has developed technical notes which guide the configuration
process for operation of ONE-XY stages with a non-zero, application
specific payload.
For operation under such conditions the Scaling Acceleration, Acceleration
Limit and PID tuning parameters may need to be adjusted. Please download
our tech notes on Scaling Acceleration, Tuning and configuring direct drive
stages on the ONE-XY page of the Newport website.
For additional information about controllers, visit www.newport.com.
WARNING
Disconnect the power plug under the following circumstances:
• If the power cord or any attached cables are frayed or damaged in
any way.
• If the power plug is damaged in any way.
• If the unit is exposed to rain, excessive moisture, or liquids are spilled
on the unit.
• If the unit has been dropped or the case is damaged.
• If you suspect service or repair is required.
• Whenever you clean the electronics unit.
CAUTION
To protect the unit from damage, be sure to:
• Keep all air vents free of dirt and dust.
• Keep all liquids away from the unit.
• Do not expose the unit to excessive moisture (85% humidity).
• Read this manual before using the unit for the first time.
WARNING
All attachment plug receptacles in the vicinity of this unit are to be of
the grounding type and properly polarized.
Contact your electrician to check your receptacles.