Newport New Focus 3502, Руководство пользователя

Страница: 24 / 51

22
3.3
Rack Mount Option
The Model 3510 Rack Mount Kit is a Chopper accessory that allows one or two
Chopper Controllers to be mounted in a standard rack. The kit consists of two
short ears, one long ear, one rack plate, and six 6-32 flathead screws. The figure
below illustrates how to use the rack mount kit to mount a single Chopper
Controller or two Chopper Controllers side-by-side.
Figure 13: Rack Mount Kit for Model 3502 Optical Chopper
3.4
Initial Setup
WARNING
The Model 3502 Optical Chopper Controller is intended for use ONLY
with New Focus Model 3502 Optical Chopper motor heads.
Connection of other devices to the unit’s motor connectors may cause
damage to the unit or the connected device, fire, and/or personal
injury.
WARNING
Before operating the Model 3502 Optical Chopper Controller,
thoroughly read and understand this
User’s Manual!
This section contains information on how to connect Model 3502 Optical
Chopper Controller to your local mains power and how to connect the Chopper
Head to the Chopper Controller.