LBP2 User Guide
Document No: 50306-001
Rev G 3/12/2020
Page 17
the camera. All cameras can be triggered with low voltage TTL or CMOS input
signals.
Caution:
Never apply voltages greater than 5VDC to the input
triggers of USB style cameras. Voltages greater than 5 Volts
may damage the camera.
1.6
Saving The Setup
To save a setup so that it can be reused later, click on the File Access button and
then the Save Setup As… item. Enter a new name for the setup file and click Save.
The last saved or opened setup will be remembered by the application and will be the
new default setup the next time LBP2 is launched. This “last used” “last saved”
Feature is also user specific, meaning that the last used or last saved file by user
johndoe will apply to that user but other default files will apply to different users.
Note: Each time LBP2 is closed and the application has detected a setup change, it
will prompt to save the new setup.
When installed, LBP2 creates two folders in the installers user account:
C:\Users\<user_name>\My Documents\LBP2 Series\Data
C:\Users\<user_name>\My Documents\LBP2 Series\Setups
The default location for data, log files, and reports is the ..\Data folder.
The default location for setup files is the ..\Setups folder.
