THEORY OF NAV-PAC OPERATION
NOISE FILTER / VOLTAGE TRANSIENT PROTECTOR WITH BATTERY
BACK-UP
The NAV-PAC is wired in series with the DC power to sensitive electronics and:
(1)
Filters out noise interference on incoming power lines.
(2)
Clamps voltage spikes and transients to a safe level.
(3)
Provides battery back-up power during voltage drops due to starter motors
and momentary losses of power.
P.O. Box 1306• Newport Beach,CA 92663
Shipping: 2911 W. Garry Ave. • Santa Ana, CA 92704
Phone: (714) 751-0488
Fax: (714) 957-1621
e-mail: [email protected]
INSTALLATION AND OPERATION MANUAL
SPECIFICATIONS
INPUT:
12 VDC, Nominal Charging:13.8-14.4 VDC,
To Prevent Discharge:13.4 -14.4 VDC, Maximum: 15.5 VDC
OUTPUT:
Filtered, Voltage Spike Protected With Back-Up Battery 20 amps Max.
BACK-UP POWER:
12.0 VDC Nominal
5.0 AH Capacity
7 amps for Fifteen (15) Minutes
10 amps for Eight (8) Minutes
15 amps for Two (2) Minutes
0-50 C
20 amps for One (1) Minute
BATTERY:
Sealed Rechargeable 5.0 AH, 5-7 Years Typical Life - Replaceable
FILTERING:
Audio Through 200 MHz
VOLTAGE SPIKE PROTECTION:
Transient Energy Capability; 100 Joules, 4,000 amps Max
OPERATING TEMPERATURE:
0-50 C
SIZE-WEIGHT
H
W
D
5.25"
6.2"
7.4"
5.2 lbs.
13.3 (cm)
15.7 (cm) 18.8 (cm) 2.4 kg
-8-
M-NAVPAC-G
AS OF November 2009
www.newmarpower.com
°
