Newland NLS-FM3051-2X, Руководство пользователя

Страница: 43 / 188

Enter Setup
29 * * Exit Setup
Access the Scanner with Your Program
Use CreateFile to access the scanner as a HID device and then use ReadFile to deliver the scanned data
to the application program. Use WriteFile to send data to the scanner.
For detailed information about USB and HID interfaces, go to www.USB.org .
Acquire Scanned Data
After scanning and decoding a barcode, the scanner sends the following input report:
Bit
Byte 7 6 5 4 3 2 1 0
0 Report ID = 0x02
1 Length of the barcode
2-57 Decoded data (1-56)
58-60 AIM ID
61-62 Reserved
63 - - - - - - -
Decoded
Data
Continued
Send Data to the Scanner
This output report is used to send data to the device. All programming commands can be used.
Bit
Byte 7 6 5 4 3 2 1 0
0 Report ID = 0x04
1 Length of the output data
2-63 Output data (1-62)