Newland NLS-EM1395, Руководство по интеграции

Страница: 8 / 25

2
Chapter 2 Installation
General Requirements
ESD
ESD protection has been taken into account when designing the EM1395 and the engine is shipped in
ESD safe packaging. Always exercise care when handling the engine outside its package. Be sure
grounding wrist straps and properly grounded work areas are used.
Dust and Dirt
The EM1395 must be sufficiently enclosed to prevent dust particles from gathering on the imager, lens
and circuit board. Dust and other external contaminants will eventually degrade the engine
’s performance.
Ambient Environment
The following environmental requirements should be met to ensure good performance of the EM1395:
Working Temperature -20
℃
~ 60
℃
Storage Temperature -40
℃
~ 85
℃
Humidity 5% ~ 95% (non-condensing)
Thermal Considerations
Electronic components in the EM1395 will generate heat during the course of their operation. Operating
the EM1395 in continuous mode for an extended period may cause excess heat to build up inside the
engine which can degrade scanning performance. Given that, the following precautions should be taken
into consideration when integrating the EM1395.

Reserve sufficient space for good air circulation during design.

Avoid wrapping the EM1395 with thermal insulation materials such as rubber.