Newland HR42 Halibut, Руководство пользователя

Страница: 39 / 222

Enter Setup
25 ** Exit Setup
Sense Mode
Sense Mode: The scanner activates a decode session every time when it detects a change in ambient illumination. The
decode session continues until the barcode is decoded or the decode session timeout expires. Pressing the trigger can
also activate a decode session.
Sense Mode
Decode Session Timeout sets the maximum time decode session continues during a scan attempt in the Sense mode. It is
programmable in 1ms increments from 0ms to 3,600,000ms. The default timeout is 3,000ms.
Decode Session Timeout
Set the decode session timeout to 1,500ms:
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcodes “1”, “5”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.