Newland HR42 Halibut, Руководство пользователя

Страница: 33 / 222

Enter Setup
19 ** Exit Setup
Good Read Vibration
You may choose whether or not to let the scanner vibrate when a barcode is successfully read by scanning the appropriate
barcode below.
** Off On
Good Read Vibration Duration
This parameter sets the length for the Good Read Vibration. It is programmable in 10ms increments from 100ms to
2,000ms. The default value is 300ms.
Set Good Read Vibration Duration
Set the Good Read Vibration duration to 800ms:
1. Scan the Enter Setup barcode.
2. Scan the Set Good Read Vibration Duration barcode.
3. Scan the numeric barcodes “8”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.