Newland HR3290 Marlin, Руководство пользователя

Страница: 46 / 189

Enter Setup
** Exit Setup 34
Level Trigger/Pulse Trigger
Level Trigger: During a scan attempt, the decode session ends once the Trigger is released.
Pulse Trigger: During a scan attempt, the release of the Trigger does not affect the decode session.
Auto Sleep
Auto Sleep allows the scanner in the Manual Mode to automatically enter the sleep or low power mode if
no operation or communication is performed for a time period (user programmable). When the scanner is
in the sleep mode, pressing the Trigger or receiving command from the host device can awake the
scanner. The scanner returns to full operation within 100ms.
The parameter below specifies how long the scanner remains idle (no operation or communication occurs)
before it is put into sleep mode. It is programmable in 1ms increments from 0ms to 65,535ms. The default
setting is 500ms. To learn how to program this parameter, see
Appendix 5 .
Time Period from Idle to Sleep
** Level Trigger Pulse Trigger
Enable Auto Sleep ** Disable Auto Sleep