Newland HR3260-CS, Руководство пользователя

Страница: 20 / 165

10
Power On, Sleep, Power Off, Reboot
Powering on the scanner
Hold down the trigger on the scanner for 1 second or longer.
Entering the sleep mode
If no operation is performed on the scanner for 5 seconds, it will automatically enter the sleep mode.
(Applicable to the Manual mode only)
Powering off the scanner
Scan the Power Off barcode. (See the Operating Mode Options in Chapter 2)
Note: The scanner that has remained in sleep mode for a specific time period (default: 5 minutes,
programmable) will be automatically turned off. (To change the time period, see the Power-Off Timeout
in Chapter 2).
Rebooting the scanner
If the scanner stops responding to input or runs abnormally, press the Reset button on the scanner to
reboot it.
Maintenance
1. The scan window should be kept clean.
2. Do not scratch the scan window.
3. Use soft brush to remove the stain from the scan window.
4. Use the soft cloth to clean the window, such as eyeglass cleaning cloth.
5. Do not spray any liquid on the scan window.
6. Only use water to clean other parts of the device.
The warranty DOES NOT cover damages caused by inappropriate care and
maintenance.