Newland HR3260-CS Скачать руководство пользователя страница 13

Страница: 13 / 165

Chapter 1 Getting Started

Introduction

The HR32 cordless scanner reads a 1D or 2D barcode by capturing its image. Adopting the advanced

technology independently developed by Newland Auto-ID Tech, it provides users with three scan

modes, including Manual Mode, Sense Mode and Continuous Mode, tailored to different scanning needs.

An illustrated introduction to the HR32 cordless scanner is included in this chapter. If you have an HR32

cordless scanner at hand, make good use of it to develop a better understanding of this manual. This

chapter is written for normal users, maintenance staff and software developers.

Features of the HR32



Comprehensive data capture: most 1D and 2D barcodes.



Fast and accurate decoding capability: integrates high-performance processor and barcode decoder

board.



Easy to configure and update.

Unpacking

Open the package and take out HR32 cordless scanner and its accessories. Check to make sure

everything on the packing list is present and intact. If any contents are damaged or missing, please keep

the original package and contact your dealer immediately for after-sale service.

Note:

CD32, the cradle for HR32 cordless scanner is individually wrapped.

Содержание HR3260-CS






































































































































































Результаты поиска

Содержание HR3260-CS

Отзывы:

Похожие инструкции для HR3260-CS

Бренды по названию

Популярные бренды

Newland HR3260-CS, Руководство пользователя

Результаты поиска

Содержание HR3260-CS

Отзывы:

Похожие инструкции для HR3260-CS

Бренды по названию

Популярные бренды