Newland HR11+ Aringa, Руководство пользователя

Страница: 65 / 193

** Enter Setup
53 Exit Setup
Inter-Keystroke Delay
This parameter specifies the delay between emulated keystrokes. It is programmable in 5ms increments
from 0ms to 75ms.
Custom Delay ** No Delay
Short Delay (20ms) Long Delay (40ms)
Example: Set the inter-keystroke delay to 5ms
1. Scan the Enter Setup barcode.
2. Scan the Custom Delay barcode.
3. Scan the numeric barcode “5” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.
Convert Case
Scan the appropriate barcode below to convert barcode data to your desired case.
** No Case Conversion Convert All to Lower Case
Convert All to Upper Case