Newland HR11+ Aringa, Руководство пользователя

Страница: 40 / 193

** Enter Setup
Exit Setup 28
Sensitivity
Sensitivity specifies the degree of acuteness of the scanner’s response to changes in ambient
illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the scanner.
You can select an appropriate degree of sensitivity that fits the ambient environment.
** High Sensitivity Low Sensitivity
Medium Sensitivity Custom Sensitivity
It is recommended not to set the custom sensitivity when one of the other three options can meet your
needs.
Note: Sensitivity: Level 0-15 ; the smaller the number, the higher the sensitivity.
Example: Set the sensitivity to level 5
1. Scan the Enter Setup barcode.
2. Scan the
Custom Sensitivity
barcode.
3. Scan the numeric barcode “5” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.