Newland HR11+ Aringa, Руководство пользователя

Страница: 128 / 193

** Enter Setup
Exit Setup 116
Check Character Verification
A check character is optional for Code 39 and can be added as the last character. It is a calculated value
used to verify the integrity of the data.
Disable: The scanner transmits Code 39 barcodes as is.
Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 39
barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check
will be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Character After Verification: The scanner checks the integrity of all Code 39 barcodes
to verify that the data complies with the check character algorithm. Barcodes passing the check will be
transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification
Do Not Transmit Check Character After Verification
Note: If the Do Not Transmit Check Character After Verification option is enabled, Code 39 barcodes
with a length that is less than the configured minimum length after having the check character excluded
will not be decoded. (For example, when the
Do Not Transmit Check Character After Verification
option is enabled and the minimum length is set to 4, Code 39 barcodes with a total length of 4 characters
including the check character cannot be read.)