Newland HR11+ Aringa, Руководство пользователя

Страница: 119 / 193

** Enter Setup
107 Exit Setup
Check Character Verification
A check character is optional for COOP 25 and can be added as the last character. It is a calculated value
used to verify the integrity of the data.
Disable: The scanner transmits COOP 25 barcodes as is.
Do Not Transmit Check Character After Verification: The scanner checks the integrity of all COOP 25
barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check
will be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Character After Verification: The scanner checks the integrity of all COOP 25
barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check
will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification
Do Not Transmit Check Character After Verification
Note: If the Do Not Transmit Check Character After Verification option is enabled, COOP 25
barcodes with a length that is less than the configured minimum length after having the check character
excluded will not be decoded. (For example, when the
Do Not Transmit Check Character After
Verification option is enabled and the minimum length is set to 4, COOP 25 barcodes with a total length
of 4 characters including the check character cannot be read.)