32
Lathe functions
Sets the changes done and exits to the main screen.
Exits from the vector angle screen to the functions list.
Exits from the function list to the main screen.
Taper
You use this function for turning or measuring a turned, tapered part. It
displays the angle made by the tool current position and the datum
position in the X-Y plane.
It has the following soft keys:
Starts the Taper function.
{
set
} Selects the datum. The display shows the taper distance (R) and the
taper angle (
Φ
) with reference to the selected datum position.
Exits from the function list to the main screen.
Zero approach
You use this function to turn the Zero approach bar graphs on or off in
normal mode of operation. It has the following soft keys:
Turns the zero approach on.
Turns the zero approach off.
Exits from the function list.
Job timer
This is a timer utility and you can use it to get the time or rate for
completing a particular job. It has the following soft keys:
Starts the Job Timer.
Stops the Job Timer.
Resets the Job Timer.
Exits from the function list.
You use this to enter the machining rate in units per hour for the
machine on which the DRO is operating. If you set this to zero, the main
DRO screen shows the Job Timer; otherwise it shows the machining cost.
Enter the rate using the numeric keys, then press
to save the value.
Datum
Where
α
= taper angle
α
o
Содержание DP900
Страница 1: ...Digital Readout Display DP900 Manual ...
