7
CLEANING & MAINTENANCE
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least once every few months
in order to provide the optimum level of performance. Always turn the power
switch off and unplug the heater before cleaning. Be sure to save the box for
off-season storage.
1.
Turn the heater off, unplug it, and wait for the heater to cool down.
2.
Use a dry cloth to clean only the external surfaces of the heater (Do not
use any cleaning agents or detergents, and never immerse the heater in
water).
3.
Remove the dust filter and pad, using a vacuum or cloth to clean off the
dust, or rinsing with water and drying completely before placing back onto
the heater.
4.
Pack the heater in the original box and store it in a cool and dry place.
SAFETY PROTECTION
Overheat protection: This heater includes an Overheat Protection System that
shuts the unit off if it overheats due to abnormal conditions (the inside of the
unit reaching 185 degrees Fahrenheit). If this occurs, the heater will shut itself
off. You should then unplug it, and inspect and remove any objects on or
adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and
resume normal operation. If the issue persists, contact customer service
immediately.
READ AND SAVE THESE INSTRUCTIONS
