13
OPERATING INSTRUCTIONS
•
In standby mode, turn the power switch to “Low” or “High.” Next, turn the
temperature setting switch to max. The heater will start to work its magic.
•
When the power switch is “Low,” the power is 750W.
•
When turned to “High,” the power is 1500W.
•
Turn the power switch to the original position and the heater will stop.
This heater is for use with a 120V outlet. The cord has a plug as shown at A in
Figure 1. An adapter (as shown in figure C) can be used for connecting three-
blade grounding-type plugs to two-slot outlets. The green grounding lug
extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be used if a three-slot
grounded outlet is available. (WARNING: Do not use an adapter for any two-
slot outlet that is not built into the wall, such as a two-prong extension cord.)
