NRP1002/P IP Phone User Manual
www.newrocktech.com 44/68
Enable GRUU
Support Globally Routable User-Agent URI (GRUU)
BLF Server
The registered server will receive the subscription package
from ordinary application of BLF phone.
Please enter the BLF server, if the sever does not support
subscription package, the registered server and subscription
server will be separated.
BLF List Number
BLF list allows one BLF key to monitor the status of a group.
Multiple BLF lists are supported.
SIP Encryption
Enable SIP encryption such that SIP transmission will be
encrypted
SIP Encryption Key
Set the pass phrase for SIP encryption
RTP Encryption
Enable RTP encryption such that RTP transmission will be
encrypted
RTP Encryption Key
Set the pass phrase for RTP encryption
8.13 LINES / Dial Peer
This functionality offers you more flexible dial rule, you can refer to the following content to know how to use
this dial rule.
Table 3 - Dial Peer Settings for Lines on Web
Parameters
Description
Phone number
There are two types of matching: Full Matching
or Prefix Matching. In Full matching, the entire
phone number is entered and then mapped per
the Dial Peer rules.
In prefix matching, only part of the number is
entered followed by T. The mapping takes place
whenever these digits are dialed. Prefix mode
supports a maximum of 30 digits.
Note: Two different special characters are used.
x -- Matches any single digit that is dialed.
[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated
by commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Port
Set the Signal port, and the default is 5060 for
SIP.
Alias
Set the Alias. This is the text to be added,
replaced or deleted. It is an optional item.
Note: There are four types of aliases.