NRP1002/P IP Phone User Manual
www.newrocktech.com 31/68
You can also press [Menu] / [Applications] / [Voice Massage] to enter MWI interface
When you opened voice message configuration interface, select the line to be configured with up/down
navigation keys.
Press [Edit] button to enable and edit the voice message number, when done, press [OK] / [Save] button
to save the configuration.
Figure 55 - Voice Message Screen
Figure 56 - Configure the Voice Message Number
6.6
Do-Not-Disturb
User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls (including call waiting).
The DND can be enabled on line basis.
To quickly enable or disable the DND on all lines.
When the device is in the default standby mode.
Press [DND] button to enable DND on all line and icon
will be displayed on the screen.
Press [DND] button again to disable DND on all line and icon
will be disappeared.
Figure 57 - DND Enabled on All Lines
If user wishes to enable or disable DND on a specific line, user could change the DND mode in DND
configurations.
