New lift FST-2XTs, Руководство пользователя

Страница: 13 / 50

Terminal strips
Overviewofterminalstripsrelevanttoreplacement
ManualforreplacingFST-2swithFST-2XTs 13
4 Terminal strips
4.1 Overview of terminal strips relevant to replacement
For terminals that are designated in this table with a capital letter after the ordinal number, the assignment has
changed.
► When replacing the terminals, make certain that the assignment is correct. See also 4.2 Adaptation table .
FST
-2s
terminal strip FST
-2s
terminal Function FST
-2XT
s
terminal strip FST
-2XT
s
terminal Function
X1 1 +24V/2A (FST supply voltage) X1 1 +24V/2A (FST supply voltage)
2 GND 2 GND
3 +24V/2A (FST supply voltage) 3 +24V/2A (FST supply voltage)
4
Programmable I/O port 0
4
Programmable I/O port 0
5 Programmable I/O port 1 5 Programmable I/O port 1
6 Programmable I/O port 2 6 Programmable I/O port 2
7 Programmable I/O port 3 7 Programmable I/O port 3
8
Programmable I/O port 4
8
Programmable I/O port 4
9 Programmable I/O port 5 9 Programmable I/O port 5
10 Programmable I/O port 6 10 Programmable I/O port 6
11 Programmable I/O port 7 11 Programmable I/O port 7
12 GND 12 GND
13 Car lighting OFF 13 Car lighting OFF
14
Landing calls OFF
14
Landing calls OFF
15 GND 15 GND
16 Temperature monitoring motor room 16 Temperature monitoring motor room
17 Overload 17 Overload
18 Full load 18 Full load
19
Monitoring of brake A
19
Monitoring of brake A
20 Monitoring of brake B 20 Monitoring of brake B
21
A
Output 24VDC brake test for contactor
monitoring
21 Drive monitoring
22 Motor monitoring 22 Motor monitoring
23
Standstill monitoring
23
Standstill monitoring
24 +24V/2A (FST supply voltage) 24 +24V/2A (FST supply voltage)
X4 1 +24 V X4 1 +24 V
2 GND 2 GND
X13 14 Bridge zone release for external
V<0.2m/s contact to terminal 7 if
applicable.
X13 14 Bridge zone release for external
V<0.2m/s contact to terminal 7 if
applicable.
1 FSM-2 X15.3 (only if J131 2-3) 1 FSM-2 X15.3 (only if J131 2-3)
2 Top correction switch "TC" (only for
incremental positioning)
2 Top correction switch "TC" (only for
incremental positioning)
3 FSM-2 X15.4 (only if J133 2-3) 3 FSM-2 X15.4 (only if J133 2-3)
5
FSM-2 X15.2 (only if J135 2-3)
5
FSM-2 X15.2 (only if J135 2-3)
6 FSM-2 X15.1 (only if J136 2-3) 6 FSM-2 X15.1 (only if J136 2-3)
7 SCBC zone release (with external
SCBC)
7 SCBC zone release (with external
SCBC)
8
SCBC zone bypass (with external SCBC)
8
SCBC zone bypass (with external
SCBC)
9 SCBC zone signal (with external SCBC) 9 SCBC zone signal (with external
SCBC)