New lift FST-2, Руководство пользователя, Страница: 22 / 194

3 FST-2-Controller user interface
3.1 LC-Display and messages
20
FST-2_HB.EN12/05
The four digit display provides a real-time description of the states of the
pre-selection relays in hexadecimal code according to the following table.
Hexadecimal values are coded number by number as described in
page 17.
Position messages
Pos: Virt=0b Real=00
The generated (virtual) and actual (real) position messages of the car
describe the states of eight switches each (8 bits, hexadecimal code) in
real-time according to the following table. Hexadecimal values are coded
number by number as described in page 17.
Bit Number Value Setting
VST =
pre-selection relay
0
Number 1
(right number)
1 active Output FST K0
1 2 active Output FST K1
2 4 active Output FST K2
3 8 active Output FST K3
4
Number 2
1 active Output FST K4
5 2 active Output FST K5
6 4 active Output FST K6
7 8 active Output FST K7
8
Number 3
1 active Output FST K8
9 2 active Output FST K9
10 4 active Output FST K10
11 8 active Output FST K11
12
Number 4
(left number)
1 active Output FST K12
13 2 active Zone signal B
14 4 active Safety circuit bypass FST K20
15 8 active Enable zone switching FST K21
Bit Number Value Setting
Virt =
virtual position
0
Number 1
(right number)
1 active Level (A and B)
1 2 active Level (A and B) with motor stopped
2 4 active Approach area
3 8 active Zone switch B (FST K23)
4
Number 2
(left number)
1 active Relevelling “up”
5 2 active Relevelling “down”
6 4 active Enable zone switching (FST K21)
7 8 Not assigned