New Leader NL345/MULTAPPLIER, Руководство оператора

Страница: 30 / 142

- 30 -
www.NewLeader.com
(800) 363-1771
312884-AA-C
NL345
Implement Preparation and Connection
WARNING
Make sure area is clear between the tractor and implement when backing up to implement�
WARNING
DO NOT wear loose clothing� Keep hands and other body parts away from connecting
parts of tractor and implement� Entanglement could cause serious injury�
WARNING
DO NOT stand on PTO, PTO driveline, tongue, or draw bar� Falling could cause death or
serious injury�
WARNING
DO NOT use intermediate support as attaching point�
NOTICE!
Make sure safety chain is stored safely when not in use�
NOTICE!
Inspect the cleanliness of connecting parts� All areas must be free of debris and dirt to ensure a
secure connection�
Implement Hitch Adjustment
Factory installs implement hitch in lower two holes of hitch holder� Dealer/customer must adjust hitch
position to match tractor drawbar� When hitch is in correct position, tighten grade 8 bolts to torque per
“Standard Torques” chart in this manual�
Implement Connection
1� Check for visible wear and make sure hitch and draw pin are clear of debris and dirt�
2� Crank the jack to adjust hitch height to match the tractor�
3� Pull out draw pin on tractor hitch� (Figure 1)
4� Back up tractor and align holes on implement hitch and hitch on tongue of implement� (Figure 2)
5� Insert draw pin through implement hitch and tractor drawbar� Insert hitch pin and lock to secure�
(Figure 3)
6� Lower handle on draw pin into locking position� Insert securing pin through hole at bottom of draw pin
and lock� (Figure 4)
7� Lube implement hitch�
Connecting Implement