New Holland Workmaster 50, Руководство оператора, Страница: 65 / 184

3 - CONTROLS AND INSTRUMENTS
DISPLAY SETTINGS
Instrument cluster Analog-Digital Instrument Cluster (ADIC) - Program
The multifunction Liquid Crystal Display (LCD) (1) can
show useful and necessary information when driving and
a menu for making the following adjustments:
• Tractor speed calibration .
• Implement width.
• Programmed maintenance.
• Sound level on/off on pressing the buttons.
• Diesel particulate filter control (DPF).
• Resetting oil change.
• Viewing active error codes and warning messages.
DCAPLT5NE044S3A
1
Navigate the menu with the rocker switches (1) and (2) ..
Each rocker switch provides two controls, depending on
the position where the rocker switch is pressed.
To enter the “SETUP MENU”, turn the start switch key
(3) to position (B) , panel powered, and subsequently keep
the switch (1) pressed on the symbol (B) for more than
three seconds.
GNIL14TR00516AA
2
Switch (1)
(A) Exit/Cancel. Use this switch position to cancel or quit
the setting and programming modes.
(B) Menu/Enter. Use this switch position to enter the
menu or confirm the settings.
Switch (2)
(C) Up arrow = scrolling up through the menu or numer-
ical value. Press this switch position repeatedly to scroll
forwards in the menu or change the value of a number.
(D) Down arrow = scrolling down through the menu or nu-
merical value. Press this switch position to scroll back-
wards in the menu or to move to the right of a position.
MOIL12TRO0042AB
3
3-21