New Holland WORKMASTER 35, Руководство оператора

Страница: 54 / 180

3 - CONTROLS AND INSTRUMENTS
Clutch pedal
The foot operated clutch pedal (1) controls the single-
stage clutch and is located on the left-hand side of the
operators platform.
NOTE: The clutch pedal is only found on gear model trac-
tors.
Always depress the clutch pedal fully when engaging or
disengaging the front-wheel drive.
To start the tractor, depress the clutch pedal fully to ensure
a safe start-up.
93099348
1
Brake pedals
WARNING
Loss of control hazard!
Uneven brake force exists on left-hand and
right-hand brakes. To ensure uniform brake
application and maximum stopping ability, al-
ways lock the service brake pedals together
before road travel.
Failure to comply could result in death or se-
rious injury.
W1188A
The right brake pedal controls the braking action of the
right rear wheel. The left brake pedal controls the braking
action of the left rear wheel.
The function of the brake pedals are identical for the HST
and gear model tractors except for the location of the ped-
als. The brake pedals
(1) on a HST model tractor are lo-
cated on the left-hand side of the operators platform and
the brake pedals
(2) on a gear model tractor are located
on the right-hand side of the operators platform.
Depress both pedals simultaneously to stop the tractor.
To assist in making sharp turns at slow speed, depress
the right or left brake pedal as required.
The brake pedal connecting pin (3) is used to secure the
brake pedals together. Lock the pedals together when-
ever the tractor is operated at high speeds or when the
tractor is used on the highway.
NHIL12CT00691AA
1
NHIL13CT00044AA
2
3-8