New Holland T4.105F, Руководство оператора

Страница: 64 / 248

3 - CONTROLS/INSTRUMENTS
Parking brake for hydraulic transmissions
Parking lock
NOTICE: On models with Power Shuttle and HI-LO when
leaving the machine, besides applying the hand brake you
must engage the parking brake
Parking lock .
Figure 1 configuration with HI-LO , Power shuttle .
Figure 2 configuration with HI-LO , Power shuttle and
creeper unit.
Besides the hand brake (1) there is the parking brake con-
trolled by the lever (2) . Its operation is as follows:
Engagement
With the tractor stationary, move the lever from the central
neutral position on the left, then forwards in the direction
(P) and subsequently to the right as shown on the plate
on the lever.
To check proper engagement, engage a
gear and a direction and then try moving:
the following warning light will come on,
accompanied by a sound signal, to indicate
correct engagement.
Disengagement
Before setting off with the tractor it is necessary to dis-
engage the brake. With the tractor stationary, move the
lever to the left, then backwards as shown on the plate on
the lever.
If the warning light stays on and there is a
sound signal while moving, it means that
the brake has not been disengaged and
therefore do not try moving the machine.
MOIL13TR00956AA
1
MOIL13TR00957AA
2
3-26