New Holland T4.105F, Руководство оператора

Страница: 63 / 248

3 - CONTROLS/INSTRUMENTS
LEFT-HAND SIDE CONTROLS
Console Left-hand console - Control identification
1. Shuttle (mechanical shuttle control lever)
NOTE: On the dual command (2 speed power shift)
version of the Power Shuttle the lever (1) governs en-
gagement/disengagement of the parking brake.
MOIL13TR00998AA
1
Handbrake
To apply the handbrake, press the red button on the end of
the lever
(1) and pull upwards. The handbrake should lock
on the third catch of the ratchet. If the handbrake exceeds
the third catch it will need to be adjusted, as described in
Chapter 7 "Maintenance". To release the handbrake, pull
the lever slightly upwards, press the red button and then
fully lower the lever.
NOTICE: Whenever leaving the tractor switch off the en-
gine and apply the handbrake.
MOIL13TR00513AA
2
Shuttle (mechanical shuttle control lever)
The lever (1) is used to select forward or reverse when a
gear ratio is engaged. To select the drive direction, move
the lever
(1) forwards, for forward drive, or backwards, for
reverse, as shown on the knob of the lever. Slow down
almost until stopping before reversing direction when the
tractor is in motion.
NOTE: To start the engine, set the shuttle lever (1) on the
central neutral position. In addition, it is recommended to
press the clutch pedal fully down.
MOIL13TR00998AA
3
3-25