New Holland T4.105F, Руководство оператора

Страница: 29 / 248

2 - SAFETY INFORMATION
Roll over protective structure (ROPS)
OPERATOR PROTECTIVE STRUCTURE
DANGER
Crushing hazard!
DO NOT operate the machine with the Roll-Over Protective Structure (ROPS) removed. Remove the
ROPS only for service or replacement.
Failure to comply will result in death or serious injury.
D0032A
DANGER
Crushing hazard!
Do not change the Roll Over Protective Structure (ROPS) in any way. Unauthorized changes such as
welding, drilling, or cutting will weaken the ROPS and decrease your protection. Have an authorized
dealer replace the ROPS if damage of any kind occurs. DO NOT TRY TO REPAIR THE ROPS.
Failure to comply will result in death or serious injury.
D0037A
WARNING
Roll-over hazard!
After an accident, fire, tip over, or roll over, a qualified technician MUST replace the Roll-Over Protec-
tive Structure (ROPS) before returning the machine to the field or job site operation.
Failure to comply could result in death or serious injury.
W0134A
Your machine is equipped with an operator Protective
Structure, such as:
a Rollover Protective Structure
(ROPS) or Falling Object Protective Structure (FOPS)
or Cab with ROPS. A ROPS may be a cab frame or a
two-posted or four-posted structure used for the protec-
tion of the operator to minimize the possibility of serious
injury. The mounting structure and fasteners forming the
mounting connection with the machine are part of the
ROPS.
The Protective Structure is a special safety component
of your machine. The Protective Structure and intercon-
necting components are a certified system.
The mounting or suspension for the Protective Structure,
operator seat and suspension, seat belts and mounting
components and wiring within the operator's protective
system MUST be carefully inspected for damage.
All damaged parts MUST be replaced.
NOTICE: The ROPS can be folded down when working
in areas with limited headroom. Unless strictly necessary,
always work with the roll bar in the raised position, as
shown in the figure.
If used incorrectly, the tractor may tip over. When the
tractor is used with the roll bar in the lowered position,
the driver is UNPROTECTED. Always raise the roll bar
after terminating work in areas with low headroom.
2-9