New Holland P2080, Руководство по обслуживанию

Страница: 11 / 41

INTRODUCTION
When welding follow the instructions in the manual. Always disconnect battery before welding on machine. Always
wash your hands after handling battery components.
Wheels and tires
Make sure tires are correctly inflated. Do not exceed recommended load or pressure. Follow instruction in the manual
for proper tire inflation.
Tires are heavy. Handling tires without the proper equipment could cause death or serious injury.
Never weld on a wheel rim with a tire installed. Always remove tire completely from rim prior to welding.
Always have a qualified tire technician service the tires and rims. If a tire has lost all pressure, take the tire and rim to
a tire shop or your dealer for service. Explosive separation of the tire can cause serious injury.
DANGER
Explosion hazard!
Welding to a wheel can create an explosive air and gas mixture. Removing air from the tire or loosen-
ing the tire on the wheel (breaking the bead) will NOT eliminate the hazard. ALWAYS remove the tire
completely from the wheel before welding.
Failure to comply will result in death or serious injury.
D0033A
Driving on public roads and general transportation safety
The Slow Moving Vehicle (SMV) sign must be located at the rear of the implement.
Comply with local laws and regulations.
Use appropriate lighting to meet local regulations.
Make sure Slow Moving Vehicle (SMV) emblem and/or Speed Indicator Symbol (SIS) is visible.
Use safety chains for trailed equipment when provided with machine or equipment.
Lift implements and attachments high enough above ground to prevent accidental contact with road.
When transporting equipment or machine on a transport trailer, make sure it is properly secured. Be sure the SMV or
SIS on the equipment or machine is covered while being transported on a trailer.
Be aware of overhead structures or power lines and make sure the machine and/or attachments can pass safely
under.
Travel speed should be such that complete control and machine stability is maintained at all times.
Slow down and signal before turning.
Pull over to allow faster traffic to pass.
Follow correct towing procedure for equipment with or without brakes.
Fire and explosion prevention
Fuel and oil that is leaked or spilled on hot surfaces or electrical components can cause a fire.
Crop materials, trash, debris, bird nests or flammable material can ignite on hot surfaces.
Always have a fire extinguisher on or near the machine.
47648338 18/06/2014
7