Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
0 - 12
LW170-LW190
SPECIFICATIONS - WHEEL LOADER LW190
ENGINE
Make and model ........................ CUMMINS C8.3-C
Net power at the flywheel ......... (ISO 9249) 150 kW
Max power speed .................................... 2200 rpm
Max torque ............................................... 92 daNm
Max torque speed .................................... 1500 rpm
Diesel type, 4 stroke, direct injection, turbocharged
Number of cylinders ............................................. 6
Bore x stroke ................................... 114 x 135 mm
Total displacement .................................. 8270 cm
3
Valve/rocker operation lash:
- intake ..................................................... 0.30 mm
- exhaust .................................................. 0.61 mm
Firing order ........................................... 1-5-3-6-2-4
Minimum starting temperature: ..................... - 20°C
Engine coolant high temperature sender
setting ..................................................... 101+2 °C
Engine oil low pressure switch
setting ................................................ 0,15±0,1 bar
ENGINE SPEEDS
Minimum idle speed (no load) ................... 800 rpm
Maximum idle speed (no load) ................ 2360 rpm
Converter stall speed ...................... 2230 ± 50 rpm
Steering stall at idle speed > ..................... 600 rpm
Attachment stall ............................... 2310 ± 50 rpm
Full stall ......................................... 1980 ± 100 rpm
TORQUE CONVERTER
Type: Niigata 13.5" (MS330) single-stage, single-
phase
Main converter pressure ................................. 5 bar
Converter safety valve pressure .................. 7.2 bar
Oil pump flow rate (at 2200 rpm) ............................
.................................................... Front 88.2 lt/min.
..................................................... Rear 50.6 lt/min.
Main pressure on the control valve ....... 21
÷
24 bar
Transmission disengagement sensor ..... 15 ± 1 bar
Transmission induction sensors to gear teeth adjust
clearance ........................................... 0.5
÷
0.8 mm
Transmission oil high temperature sensor setting ..
............................................................... 122 ± 3°C
AXLES
Axles complete with disc brakes in oil bath.
Self-locking differentials.
Planetary final drives.
Stiff front axle, support structure type
- reduction ratio ....................................... 1 : 21680
Oscillating rear axle, support structure type
- reduction ratio ....................................... 1 : 21680
TIRES
Type .................................. 23.5 R25 XHA tubeless
Inflating pressure
- Work:
front = 3.00 bar
rear = 2.00 bar
- Transfer:
front = 2.00 bar
rear = 2.00 bar
Wheel tightening torque ........................ 78.8 daNm
BRAKES
Delivery brakes pump at nominal speed . 29.7 lt/min.
Accumulator recharge start pressure ..... 80 ± 5 bar
Accumulator recharge end pressure .... 110 ± 5 bar
Accumulator pre-charge pressure (1.4 lt) ..... 45 bar
Transmission disengagement pressure switch
setting ........................................................... 15 bar
Brake oil low pressure sensor setting ........... 60 bar
Brake lights pressure switch setting ............ 1.8 bar
Parking brake applied pressure switch setting .......
......................................... ON 10 bar - OFF 15 bar
STEERING SYSTEM
Cylinders ........................................ 2 double-acting
- bore x stroke ................................. 80 x 422 mm
Stand-by/main priority valve setting ........... 206 bar
MARKING
:
L
W190
IDENTIFICATION
- 2676.190.22.1
TRANSMISSION
Maximum ground speeds (forward/reverse) in kph
(with 23.5 R25 tyres):
Forward speed
kph
Reverse speed
kph
1
st
8.1
1
st
8.9
2
nd
13.3
2
nd
14.6
3
rd
22.0
3
rd
25.0
4
th
37.5
4
th
40.0
