New Holland FR450 TIER 3 страница 21 Скачать руководство пользователя | Manualshive

Страница: 21 / 81

background image

INTRODUCTION

Safety rules

LEGAL OBLIGATIONS

This machine may be equipped with special guarding or other devices in compliance with local legislation. Some to
these require active use by the operator. Therefor, check local legislations on the usage of this machine.

ACCIDENT PREVENTION

Most accidents or injuries that occur in workshops are the result of non compliance to simple and fundamental safety
principles. For this reason, IN MOST CASES THESE ACCIDENTS CAN BE AVOIDED by applying the fundamental
safety principles, acting with the necessary caution and care.

Accidents may occur with all types of machine, regardless of how well the machine in question was designed and
built.

CAUTION

Unexpected machine movement!
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or
raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in minor or
moderate injury.

C0038A

SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND COMPONENTS - HY-
DRAULICS

• Flexible hose assemblies must not be constructed from hoses which have been previously used as part of a hose

assembly.

• Do not weld hydraulic pipes: when flexible hoses or piping are damaged, replace them immediately.

• It is forbidden to modify a hydraulic accumulator by machining, welding or any other way.

• Before removing hydraulic accumulators for servicing, the liquid pressure in the accumulators must be reduced to

zero.

• Pressure check on hydraulic accumulators must be carried out by a method recommended by the accumulator

manufacturer.

• Take care not to exceed the maximum allowed pressure of the accumulator. After any check or adjustment, check

for leakages or gas in the hoses or tubes.

SAFETY RULES

General guidelines

• Carefully follow specified repair and maintenance procedures.

• When appropriate, use P.P.E (Personal Protective Equipment)

• Do not wear rings, wristwatches, jewellery, unbuttoned or loose articles of clothing such as: ties, torn clothing,

scarves, open jackets or shirts with open zips that may remain entangled in moving parts. It is advised to wear
approved safety clothing, e.g.: non-slip footwear, gloves, safety goggles, helmets, etc.

• Do not carry out repair operations with someone sitting in the driver's seat, unless the person is a trained technician

who is assisting with the operation in question.

• Do not operate the machine or use any of the implements from different positions, other than the driver's seat.

• Do not carry out operations on the machine with the engine running, unless specifically indicated.

47812470 23/02/2015

14

«
...
19
20
21
22
23
...
»

Содержание FR450 TIER 3


















































































Отзывы:

Нет отзывов

Похожие инструкции для FR450 TIER 3

Бренд: GALLERY Страницы: 18

Бренд: XAG Страницы: 24

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: ODA Страницы: 103

Бренд: Rapid Technic Страницы: 152

Бренд: CAE Healthcare Страницы: 108

Бренд: Cannon Страницы: 36

Бренд: Varytec Страницы: 5

Бренд: Saab Страницы: 98

Бренд: Kaixin Страницы: 89

Бренд: M-Audio Страницы: 25

Бренд: ZOLL Страницы: 37

Бренд: Wacker Neuson Страницы: 34

Бренд: Wagan Страницы: 4

Бренд: Wachs Страницы: 22

Бренд: XanLite Страницы: 2

Бренд: X-Rite Страницы: 6

Бренд: ATD Tools Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды