New Holland F156.6, Руководство по обслуживанию, Страница: 25 / 41

Edition 12/2007 87726937A 0 - 17
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
3 OPERATION
3.1 General Remarks
Do not operate the machine until you have read and
understood the operating instructions.
Pay particular attention to:
the ‘Basic Safety Information’ and all the warning
signs and instruction plates attached to the
machine.
Before starting the machine, familiarize yourself with
the locations, functions and operating directions of
the controls. Operate the controls only from the
driver’s seat.
Keep the operating instructions stored permanently
at the machine.
OPERATING PERSONNEL
Operating personnel must be experienced in
working with and operating this or similar machines.
The required skills can be acquired through a
course of instruction lasting a few days, which could
be provided by a service technician, or by attending
a driver training course.
PERSONAL PROTECTIVE EQUIPMENT AND
WORK CLOTHES
Wear a hard hat and protective shoes with non-slip
soles. Smooth soles can slip on steps and pedals,
thus causing injuries or operator errors.
Wear close-fitting work clothes when operating the
machine. Loose or wide items of clothing can cause
the control lever to be operated accidentally.
SEAT BELT
On machines with seat belts for operating
personnel:
Check the seat belt attached to the driver’s seat.
Replace immediately if damaged, or after an
accident. Put the seat belt on before starting work.
OPERATING CONDITION OF THE MACHINE
Only operate the machine if in a reliable operating
condition, and only as required by the regulations.
Always follow the safety instructions.
Always carry out inspections and maintenance work
punctually (or have them carried out).
Only operate the machine with the attachments and
component combinations approved by the
manufacturer. See the Technical Data for clear
information on this subject.
Only attach and work with different equipment or
component combinations if the manufacturer has
checked and approved the planned type of
assembly.
Before starting work / driving, check whether the
brake, steering, lighting and signalling systems are
operational.
Poor visibility can lead to accidents. Clean the
windows, and the lenses on lamps, before operating
the machine.
Check whether all warning signs and instruction
plates on the machine are present, and that they are
clearly legible.
GETTING IN AND OUT
Face towards the machine when getting in or out.
Use only the steps, platforms and handles provided
when getting in or out.
Keep steps, platforms and handles in a condition
where they provide a secure grip. Clean them
immediately if they become soiled with oil, grease,
soil, mud, snow, ice, or other matter.
DANGER AREA
The danger area is that area around the machine
where anyone might come within the range of
movement of the machine, its working equipment
and attachments, swinging loads, falling loads, or
downward moving tools.