New Holland F156.6, Руководство по обслуживанию, Страница: 17 / 41

Edition 12/2007 87726937A 0 - 9
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
1.7 Notes on special types of
hazard
1.7.1 Electrical energy
Use only original fuses with the correct current
rating! Switch the machine off immediately if there
are faults in the electrical system.
Keep the machine at a sufficient distance from
overhead power lines. If working close to overhead
power lines, keep the equipment away from the
lines. Danger of death!
Find out the what the required safety clearances
are.
If contact is made with high-voltage lines:
•
Do not leave the machine.
•
Drive the machine out of the danger area.
•
Warn persons on the ground not to come
near, or to touch the machine.
•
Have the voltage switched off.
•
Only leave the machine when the
contacted/damaged power line has been
safely de-energized.
The machine’s electrical equipment should be
regularly inspected. Faults such as loose
connections or braised cables must be corrected
immediately.
1.7.2 Gas, dust, vapour, smoke
Only operate combustion engines and fuel-driven
heaters in well-ventilated areas!
If using the equipment in an enclosed space, ensure
there is sufficient ventilation before starting.
Follow the local regulations applying at the worksite.
Only carry out welding, firing, or grinding work on
the machine if this has been explicitly approved
- risk of fire and explosions!
Before carrying out welding, firing or grinding work,
clean away dust and combustible materials from the
machine and its surroundings, and provide
adequate ventilation (risk of explosion)!
1.7.3 Hydraulic, pneumatic system
Regularly inspect all pipes, hoses, and screw
connections for leaks and visible damage. Repair
any damage immediately! Spurting oil can cause
burns and other injuries.
Before starting repair work, any system blocks and
pressure lines (hydraulic, compressed air) that are
to be opened up must first be depressurized as
indicated in the descriptions of the assemblies.
Hydraulic and compressed air lines must be
correctly laid and assembled. Do not get the
connections mixed up!
Valves, and the length and quality of hoses must
meet the requirements.
1.7.4 Noise
Noise insulation devices must be in the protection
position during operation.
Wear the prescribed personal ear protection!
1.7.5 Oil, grease and other chemical
substances
If handling oil, grease or other chemical substances,
follow the safety instructions for the product
concerned!
Be careful when handling operating fluids and
auxiliary materials (risk of burns and scalds).