New Holland F156.6, Руководство по обслуживанию, Страница: 15 / 41

Edition 12/2007 87726937A 0 - 7
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
1.6 Special operations when using
the machine, servicing and fault
repair work as part of working
procedure, waste disposal
Apply the intervals specified in the operating
instructions for adjustment, maintenance, and
inspection tasks, and pay attention to the
replacement data for parts and components. These
tasks should only be carried out by qualified
personnel!
Inform the operating personnel before starting
special or repair operations! Appoint supervisors.
When carrying out any tasks related to the
operating, retrofitting or adjusting of the machine
and its safety devices, and to maintenance,
inspection or repair work, follow the
switch-on/switch-off procedures described in the
operating instructions and the notes concerning
repair operations.
Whenever required, seal off the repair area, leaving
plenty of room!
If the machine is switched off completely for
maintenance and repair work, it must be secured to
prevent it being switched on accidentally:
•
Take out the key and
•
attach a warning sign.
Only carry out maintenance and repair work when
the machine is parked on a level, sufficiently
load-bearing surface and secured to prevent it
moving off or collapsing!
When being replaced, individual components and
major assemblies should be carefully fastened and
secured to the lifting gear. Only use suitable and
correctly functioning lifting gear, and load-handling
equipment with sufficient carrying capacity. Do not
stand or work under suspended loads!
Only appoint experienced persons to attach loads
and instruct crane drivers! The instructor must stand
where they are visible to the operator, or be in
contact with him by voice communications.
For assembly work carried out above body height,
use the appropriate safety hoists and work platforms
provided for this purpose.
Do not use machine parts as hoists!